A clean conveyor is an efficient conveyor. Mighty Lube conveyor cleaning brushes will help you keep your conveyors running at their best. We offer conveyor trolley and chain cleaners as well as track, rail and yoke cleaning brushes.
By removing and preventing the accumulation of build-up and debris, these conveyor cleaning systems reduce part contamination and improve grounding necessary on powder and e-coat lines. The brush assemblies have replaceable brushes which are easy to install and do not require the removal of the entire unit.
We offer cleaning systems that fit all major monorail and enclosed track style conveyors, including Richards-Wilcox, Unibilt, and Rapid. For information on other conveyor types, please contact us.
Cleaning the trolley load bearing surfaces and the rail will improve grounding for better parts coating and also eliminate rejected parts due to contamination!
- Beam Sweeps
- Yoke Brushes
- Chain Cleaner (I-Beam)
- Chain Cleaner (Enclosed Track)
- Channel Sweeps
- Part Saver Brushes
I-Beam / Monorail Type Conveyor Rail Cleaning Brushes
The Mighty Lube® Beam Sweep is designed to clean the web surfaces of the rail. Cleaning the rail helps reduce debris fall out as well as improve grounding contact. This unit is installed into a chain link so the brushes can clean the rail as the chain travels. For best cleaning results it is recommended to install one beam sweep for every 250 feet of chain. Replaceable brushes are made stainless steel material.
Model 3-91BC for 3″ I-Beam
Model 4-91BC for 4″ I-Beam
Model 6-91BC for 6″ I-Beam
Beam Sweep Replacement Brushes
Made of Stainless Steel – Each unit requires 6 brushes for complete replacement (2 Side, 4 Top/Bottom)
Side Brush: 913BRS
Top/Bottom Brush: 913BRTB
Side Brush: 914BRS
Top/Bottom Brush: 914BRTB
Side Brush: 916BRS
Top/Bottom Brush: 916BRTB
Conveyor Trolley Yoke Cleaning Brush
The Mighty Lube® Yoke Brush cleans the yokes on the trolley as the chain travels around. You install this brush by welding to the bottom of the rail. The Yoke Brush is designed to remove buildup from hard to reach, often overlooked sources of contamination.
Model 30Y for 3″ I-Beam
Model 40Y for 4″ & 6″ I-Beam
Stainless Steel Material
Part: 30RB (1 required for complete replacement)
Part: 40RB (1 required for complete replacement)
Non-Powered I-Beam Conveyor Chain & Trolley Cleaner
Mighty Lube Non-Powered I-Beam Conveyor Chain Cleaners are a brush system that cleans the chain and trolleys on I-Beam conveyors as the chain travels. This chain cleaning brush assembly removes debris which helps to reduce rejects without contaminating parts. The chain cleaner adjusts to contact hard to reach points and is spring loaded to prevent jamming if a hanger passes at an odd angle.
Watch Video of an installed 400-I Non-Powered I-Beam Chain Cleaner:
Models With Stainless Steel Brushes
Model 300-I for 3″ I-Beam
Model 400-I for 4″ I-Beam
Model 600-I for 6″ I-Beam
I-Beam Chain & Trolley Cleaning Brushes (Crimped Steel Brushes)
Replacement brushes for 300-I, 400-I, 600-I
Crimped Carbon Steel Material
Part: 75RB (20 required for replacement on complete unit)
Models With Nylon Brushes
Model 300-INB for 3″ I-Beam
Model 400-INB for 4″ I-Beam
Model 600-INB for 6″ I-Beam
I-Beam Chain & Trolley Cleaning Brushes (Long-Life, Carbide-Impregnated Nylon Brushes)
Replacement brushes for 300-INB, 400-INB, 600-INB
Long-Life, Carbide-Impregnated Nylon Brushes
Part: 75NRB (20 required for replacement on complete unit)
Enclosed Track Conveyor Chain and Bearing Cleaners
These conveyor cleaning brush assemblies remove dirt and debris from enclosed track conveyor chains. The units come pre-mounted on a modified rail section.
Enclosed Track Conveyor Channel Sweeps
The channel sweeps are designed to remove dirt and debris from the internal conveyor track surfaces. This improves grounding and helps reduce part rejects. These brush assemblies are easily installed by replacing a single chain link. We recommend installing one channel cleaner every 250 feet of chain.
Overspray Eliminator Brush
This is also known as the part saver brush because it prevents contamination of parts by lubricant overspray. The part saver brush assembly mounts on the conveyor at the location of the lubricator.