Mighty Lube® 2100L Series Self-Contained Lubricators
Available for Enclosed Track, I-Beam, Power and Free and other conveyor types.
Mighty Lube Single Line Conveyor Lubrication Systems are an all-in-one lubricator made for lubricating a single conveyor line. This unit consists of a 5.5 gallon tank on top of the lubricating head unit. As with all Mighty Lube lubricators, the single-line unit properly lubricates conveyor chains and open trolley bearings. As a result, the conveyor life is extended and manufacturing efficiency is increased. And unlike some lubrication methods in use today, Mighty Lube automatic conveyor lubricators place a precise shot of lubricant at each lubrication point, eliminating waste and droplets.
Benefits of the Mighty Lube Single-Line Lubricator:
- Available for most conveyor configurations
- An ideal solution and excellent value for customers with one or only a few conveyor lines
- Requires no plant air for operation
- Economical to operate
- Easy to install: Simply weld the supplied modified rail/track section into the existing rail/track, hook up the power, and begin lubricating!
Series 2100 Self-Contained Conveyor Lubricator Features:
Patented Microprocessor Controls make operation for Mighty Lube conveyor lubrication systems as easy as pushing a button. The simple step-by-step menu can be programmed easily, with no complicated readouts or switches to set.
Each Mighty Lube Self-Contained conveyor lubricator is engineered to include:
- 5.5 gallon capacity heavy duty steel reservoir with solvent-resistant finish
- Lubricant level gauge
- Low level audio alarm
- Programmable microprocessor controller includes:
– Easy to use keypad
– Password access for authorized users
– LCD display showing current conveyor chain link, chain speed, and programmed values
– Adjustable parameters include lubricant cycles, lubricant shot volume, chain link number, and chain pitch
– Additional inputs to control other lubrication points, other lubricators, and automatic greasers for sealed trolley wheels - During lubrication cycles, lubricant pump is activated by conveyor power chain motion
- Memory circuit to automatically resume if power is interrupted
- Extended range proximity sensor to detect lubrication points
- Premounted on a modified section of rail/track ready to be welded into place
- Operating voltage – 120VAC, 60 Hz
I-Beam Self-Contained Lubricators
Model #2103L
3″ Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings
Model #2104L
4″ Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings
Model #2106L
6″ Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings
Units are also available for most other conveyor manufacturers.
Self-Contained Lubricators for Enclosed Track Type Conveyors
Model #2100L
For Richards-Wilcox Overhead Conveyors
Lubricates: Chain Pivots, Horizontal Bearings and Vertical Bearings
Model #2101L
For Unibilt or Rapid Overhead Conveyors
Lubricates: Chain Pivots, Horizontal Bearings and Vertical Bearings
Model #2102L
For Double Vertical Bearing Chain Conveyors
Lubricates: Chain Pivots, Horizontal Bearings and Single and Double Vertical Bearings
Model #2110L
For Round Tube Overhead Conveyors
Lubricates: Chain Pivots, Horizontal Bearings and Vertical Bearings
For all MODEL #2010L Units: Customer Must Supply a 30″ Rail Section for Pre-Mounting
Units are also available for most other conveyor manufacturers.
Power & Free Self-Contained Lubricators
Model #2105L
Power and Free Conveyor Lubricator For Richards-Wilcox Conveyors
Lubricates: Chain Pivots and Horizontal/Vertical Bearings on power chain, Load Bearings and Guide Rollers on the Free Carrier
Model #2107L
Power and Free Conveyor Lubricator For Unibilt or Rapid Conveyors
Lubricates: Chain Pivots and Horizontal/Vertical Bearings on power chain, Load Bearings and Guide Rollers on the Free Carrier
Model #2108L
Power and Free Conveyor Lubricator For 3″ I-Beam
Lubricates: Chain Pins and Trolley Bearings on the Power Chain, Load Bearings and Guide Rollers on the Free Carrier
Model #2109L
Power and Free Conveyor Lubricator For 4″ I-Beam
Lubricates: Chain Pins and Trolley Bearings on the Power Chain, Load Bearings and Guide Rollers on the Free Carrier
NOTE: For all power & free units the customer must supply a rail section with at least 36″ between the yokes for pre-mounting.
Lubricator Equipment Add-On Options:
Remote Fill System
Eliminates the need to climb a ladder in cases where the conveyor is high above floor level
Power supplies for other operating voltages
Have Multiple Conveyor Lines?
We also carry Lubrication Systems for multiple conveyor lines which is ideal for larger facilities that need a centralized unit.