A clean conveyor is an efficient conveyor. Mighty Lube conveyor cleaning brushes will help you keep your conveyors running at their best.
By removing and preventing the accumulation of build-up and debris, these conveyor cleaning systems reduce part contamination and improve grounding necessary on powder and e-coat lines. The brush assemblies have replaceable brushes which are easy to install and do not require the removal of the entire unit.
We offer cleaning systems that fit all major monorail and enclosed track style conveyors, including Richards-Wilcox, Unibilt, and Rapid. For information on other conveyor types, please contact us.
Cleaning the trolley load bearing surfaces and the rail will improve grounding for better parts coating and also eliminate rejected parts due to contamination!
Enclosed Track Conveyor Brushes
Enclosed Track Conveyor Channel Sweeps
The channel sweeps are designed to remove dirt and debris from the internal conveyor track surfaces. This improves grounding and helps reduce part rejects. These brush assemblies are easily installed by replacing a single chain link. We recommend installing one channel cleaner every 250 feet of chain.
Enclosed Track Conveyor Chain and Bearing Cleaners
These conveyor cleaning brush assemblies remove dirt and debris from enclosed track conveyor chains. The units come pre-mounted on a modified rail section.
I-Beam Conveyor Brushes
Cleaning the chain and bearing surfaces will help eliminate part rejects, prolong the life of your chain, achieve better grounding, increase the performance of your line, and improve lubricant effectiveness! Mighty Lube offers Beam Sweep Brushes in 3″, 4″, and 6” sizes. Ease of installation and removal makes replacing brushes a quick operation, keeping downtime to a minimum. Not only will the removal of debris and accumulated deposits greatly reduce or even eliminate reject parts, but it allows the lubrication system to perform more efficiently, reducing contamination by lubricant as well as debris.
Conveyor Rail Cleaning Brushes
Model #3-91BC for 3″ I-Beam
Model #4-91BC for 4″ I-Beam
Model #6-91BC for 6″ I-Beam
Replacement brushes for #3-91BC
Sides – #913BRS (2)
Top/Bottom – #913BRTB (4)
Replacement brushes for #4-91BC
Sides – #914BRS (2)
Top/Bottom – #914BRTB (4)
Replacement brushes for #6-91BC
Sides – #916BRS (2)
Top/Bottom – #916BRTB (4)
Yoke Cleaning Brush Assembly
The I-beam yoke cleaning brush removes buildup from hard to reach, often overlooked sources of contamination. Install by welding the mounting block to the bottom of your conveyor rail.
Conveyor Trolley Yoke Cleaning Brush
Model #30Y for 3″ I-Beam
Model #40Y for 4″ & 6″ I-Beam
Replacement brushes for #30Y
Replacement brushes for #40Y
Non-Powered Chain and Trolley Cleaner
These I-beam chain and trolley cleaners are easy to install. The brush clamps on top of I-beam and there is no welding required.
Chain & Trolley Brush Cleaner With Crimped Steel Brushes
Model #300-I for 3″ I-Beam
Model #400-I for 4″ I-Beam
Model #600-I for 6″ I-Beam
Chain & Trolley Brush Cleaner With Long-Life, Carbide-Impregnated Nylon Brushes
Model #300-INB for 3″ I-Beam
Model #400-INB for 4″ I-Beam
Model #600-INB for 6″ I-Beam
Replacement brushes for #300-I, #400-I, #600-I
Crimped Carbon Steel
Replacement brushes for #300-INB, #400-INB, #600-INB
Long-Life, Carbide-Impregnated Nylon Brushes
Need something more powerful to clean your conveyor chain and trolleys? Check out the powered brushes.
Overspray Eliminator Brush
This is also known as the part saver brush because it prevents contamination of parts by lubricant overspray. This brush assembly mounts on the conveyor at the location of the lubricator.