Conveyor Lubrication Systems (Multi-Line)

Avoid costly chain replacement and plant downtime. Our Mighty Lube Centralized Conveyor Lubrication Systems can properly lubricate several conveyors, extending their lives and increasing manufacturing efficiency. And unlike some lubrication methods in use today, Mighty Lube lubricators place a precise shot of lubricant at each lubrication point, eliminating waste and droplets.

Mighty Lube’s centralized lubrication systems are:

  • Available for many conveyor configurations
  • Ideal for plants with multiple conveyors, inverted conveyors, or heavy lubrication requirements
  • Requires no plant air for operation
  • Supports up to 10 lubricating heads in a 500 foot radius
  • A cost-effective and easily-used tool for managing conveyor lubrication needs
  • Utilizes a Central Pumping Reservoir that can be conveniently mounted on the floor

Mighty Lube Systematic Lubrication, Inc. produces the highest quality and most user-friendly lubrication equipment available to the industry. Patented Microprocessor Controls make operation as easy as pushing a button. The simple step-by-step menu can be programmed easily, with no complicated readouts or switches to set.

Central Pumping Reservoir with D-Series Interface & Power Supply

Mighty Lube Central System Conveyor Power Supply Interface and 10 Gallon Lubricant Reservoir Tank

Model # 7110D
10-Gallon Reservoir with D-Series Full Interface & Power Supply

Mighty Lube Central System D Series Conveyor Power Supply Interface and 65 Gallon Lubricant Reservoir Tank

Model # 7165D
65-Gallon Reservoir with D-Series Full Interface & Power Supply

New Features brought to you by the D-Series:

  • Observe all conveyor inputs and visual lubricant data
  • Track lubricant usage
  • Access to change IP address of power supply
  • View locally connected conveyors
  • Visualize reservoir lubricant levels

Reservoir & Power Supply Equipped with:

  • Full user interface for programming
  • 1/3HP TEFC pump drive motor
  • Heavy duty rotor gear pump
  • Indicator lamps for
    – 120VAC power
    – Motor on
    – Communication
    – Lube Signal
    – Faults (low lubricant, out of lube, no 24VDC power)
  • Flow sensing device to detect severed lube line, shut down pump motor, and activate audio/visual alarm
  • Heavy duty steel reservoir with solvent-resistant finish
  • Automatic pump motor start and stop circuit
  • Low level audio/visual alarm
  • Lubricant empty audio/visual alarm with pump motor shut down circuit
  • Operating voltage – 120VAC, 60Hz, 5A

Lubricating head(s) equipped with:

  • Programmable microprocessor controller includes:
    • Easy to use keypad
    • Password access for authorized users
    • LCD display showing current conveyor chain link, chain speed, and programmed values
    • Adjustable parameters include lubricant cycles, lubricant shot volume, chain link number, and chain pitch
    • Additional inputs to control other lubrication points, other lubricators, and an automatic greaser for sealed trolley wheels
  • Memory circuit to automatically resume if power is interrupted
  • Extended range proximity sensor to detect lubrication points
  • Lubricant delivery nozzles configured to lubricate specified lubrication points
  • Premounted on a modified section of track/rail ready to be welded into place
  • Operating voltage – 24VDC supplied by the Central Pumping Reservoir and Power Control Unit

Optional Add-Ons for Multi-Line Conveyor Lubrication System:

  • Mighty Lube Next Generation Conveyor Monitoring System, which provides a full range of critical conveyor information, including chain wear, drive amps, air take up pressure, lubricant levels, lubricant cycles, and more. All this information is available right on your networked computer
  • Portable Chain Wear Monitor, which provides on-demand chain wear information for each chain link

Enclosed Track Central Lubrication System Head Units

Model 9000L Mighty Lube Central Head Unit for Richards-Wilcox Conveyors
Model 9000L Front View
back view of Mighty Lube 9000L Central Lubricator head unit for Richards-Wilcox Enclosed Track Conveyors
Model 9000L Rear View
9001L model central system enclosed track conveyor lubricator for double vertical bearing chain conveyors
Model 9001L Front View
rear view of central system enclosed track conveyor lubricator
Model 9001L Rear View

Model #9000L
Richards-Wilcox Overhead Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings

Model #9000INVL
Richards-Wilcox Inverted Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings

Model #9001L
Unibilt or Rapid Overhead Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings

Model #9001INVL
Unibilt or Rapid Inverted Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings

Model #9002L
Dual Vertical Bearing Chain Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal Bearings and Single/Dual Vertical Bearings

Model #9010L
Round Tube Overhead Conveyor Lubricator
Lubricates: Chain Pivot, Horizontal and Vertical Bearings
For all MODEL #9010L Units: Customer Must Supply a 30″ Rail Section for Pre-Mounting

Units are also available for most other conveyor manufacturers.

I-Beam Central Lubrication System Head Units

Model 9003L Central System I-Beam Conveyor lubricator lubricates chain pins and trolley bearings
Model 9003L Front View
rear view of central system 3 inch i-beam conveyor lubricator
Model 9003L Rear View

Model #9003L
3″ Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Model #9003INVL
3″ Inverted Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Model #9004L
4″ Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Model #9004INVL
4″ Inverted Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Model #9006L
6″ Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Model #9006INVL
6″ Inverted Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Units are also available for most all other conveyor manufacturers

Power & Free Central Lubrication System Head Units

mighty Lube Model 9007L Power and Free Conveyor Lubricator

Model #9005L
Power and Free Conveyor Lubricator For Richards-Wilcox Conveyors
Lubricates: Chain Pivots and Horizontal/Vertical Bearings on power chain, Load Bearings and Guide Rollers on the Free Carrier

Model #9007L
Power and Free Conveyor Lubricator For Unibilt or Rapid Conveyors
Lubricates: Chain Pivots and Horizontal/Vertical Bearings on power chain, Load Bearings and Guide Rollers on the Free Carrier

Model #9008L
Power and Free Conveyor Lubricator For 3″ I-Beam
Lubricates: Chain Pins and Trolley Bearings on the Power Chain, Load Bearings and Guide Rollers on the Free Carrier

Model #9009L
Power and Free Conveyor Lubricator For 4″ I-Beam
Lubricates: Chain Pins and Trolley Bearings on the Power Chain, Load Bearings and Guide Rollers on the Free Carrier

For All Power & Free units: the Customer Must Supply a Rail Section with at least 36″ between the yokes for Pre-Mounting

For pricing on Mighty Lube Conveyor Lubrication Systems, please submit a quote request or call us today at +1-231-924-6011.

Get A Quote