Conveyor Lubrication Systems (Single Line)

Avoid costly chain replacement and plant downtime. Our Mighty Lube Conveyor Lubrication Systems properly lubricate a conveyor chains and open trolley bearings, extending the conveyor’s life and increasing manufacturing efficiency. And unlike some lubrication methods in use today, Mighty Lube Conveyor Lubrication Systems place a precise shot of lubricant at each lubrication point, eliminating waste and droplets.

  • Available for most conveyor configurations
  • An ideal solution and excellent value for customers with a medium number of conveyors
  • Requires no plant air for operation
  • Economical to operate
  • Easy to install: Simply weld the supplied modified rail/track section into the existing rail/track, hook up the power, and begin lubricating!

Features

Mighty Lube Systematic Lubrication, Inc. produces the highest quality and most user-friendly lubrication equipment available to the industry. Patented Microprocessor Controls make operation for our conveyor lubrication systems as easy as pushing a button. The simple step-by-step menu can be programmed easily, with no complicated readouts or switches to set. Each Self-Contained conveyor lubricator is engineered to include:

  • 5.5 gallon capacity heavy duty steel reservoir with solvent-resistant finish
  • Lubricant level gauge
  • Low level audio alarm
  • Programmable microprocessor controller includes:
    – Easy to use keypad
    – Password access for authorized users
    – LCD display showing current conveyor chain link, chain speed, and programmed values
    – Adjustable parameters include lubricant cycles, lubricant shot volume, chain link number, and chain pitch
    – Additional inputs to control other lubrication points, other lubricators, and  automatic greasers for sealed trolley wheels
  • During lubrication cycles, lubricant pump is activated by conveyor power chain motion
  • Memory circuit to automatically resume if power is interrupted
  • Extended range proximity sensor to detect lubrication points
  • Premounted on a modified section of rail/track ready to be welded into place
  • Operating voltage – 120VAC, 60 Hz

Options

  • Chain Wear Monitor
    Provides on-demand chain pin wear for each link
  • Remote Fill System
    Eliminates the need to climb a ladder in cases where the conveyor is high above floor level
  • Power supplies for other operating voltages

Enclosed Track Self-Contained Conveyor Lubrication Systems

Front view of a 2000L Conveyor Lubrication Systems for Richards Wilcox overhead conveyor which is an enclosed track conveyor
Rear view of a 2000L Conveyor Lubricator for an enclosed track self contained conveyor system. Fits a Richards Wilcox overhead conveyor

Model #2000L
For Richards-Wilcox Overhead Conveyors
Lubricates: Chain Pivots, Horizontal Bearings and Vertical Bearings

Model #2001L
For Unibilt or Rapid Overhead Conveyors
Lubricates: Chain Pivots, Horizontal Bearings and Vertical Bearings

Model #2002L
For Double Vertical Bearing Chain Conveyors
Lubricates: Chain Pivots, Horizontal Bearings and Single and Double Vertical Bearings

Model #2010L
For Round Tube Overhead Conveyors
Lubricates: Chain Pivots, Horizontal Bearings and Vertical Bearings
For all MODEL #2010L Units: Customer Must Supply a 30″ Rail Section for Pre-Mounting

Units are also available for most other conveyor manufacturers.

I-Beam Self-Contained Lubricators

This is the front side of the Model 2004L Self Contained Conveyor Lubrication Systems for a four inch I-Beam rail conveyor system.
This is the back side of the Model 2004L Self Contained I-Beam Conveyor Lubricator. This model is for a four inch I-Beam rail conveyor system.

Model #2003L
3″ Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Model #2004L
4″ Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Model #9006L
6″ Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings

Units are also available for most other conveyor manufacturers.

Power & Free Self-Contained Lubricators

Single Line power and free self contained lubricator lubricates Chain Pivots, Bearings on power chain, Load Bearings and Guide Rollers

Model #2005L
Power and Free Conveyor Lubricator For Richards-Wilcox Conveyors
Lubricates: Chain Pivots and Horizontal/Vertical Bearings on power chain, Load Bearings and Guide Rollers on the Free Carrier

Model #2007L
Power and Free Conveyor Lubricator For Unibilt or Rapid Conveyors
Lubricates: Chain Pivots and Horizontal/Vertical Bearings on power chain, Load Bearings and Guide Rollers on the Free Carrier

Model #2008L
Power and Free Conveyor Lubricator For 3″ I-Beam
Lubricates: Chain Pins and Trolley Bearings on the Power Chain, Load Bearings and Guide Rollers on the Free Carrier

Model #2009L
Power and Free Conveyor Lubricator For 4″ I-Beam
Lubricates: Chain Pins and Trolley Bearings on the Power Chain, Load Bearings and Guide Rollers on the Free Carrier

NOTE: For all power & free units the customer must supply a rail section with at least 36″ between the yokes for pre-mounting.

We also carry Lubrication Systems for multiple conveyor lines which is ideal for larger facilities that need a centralized unit.