Conveyor Chain Lubricants

Mighty Lube not only creates automatic conveyor lubrication equipment, we are also a conveyor lubricant manufacturer. Conveyor chain lubrication can save your facility time and money that otherwise would be spent on conveyor repairs and maintenance. Whether you are maintaining a conveyor that goes through high temp ovens or through moisture from wash bays, we have a lubricant for your needs.

These are some of the conveyor lubricants that we have to offer. These lubricants work in Mighty Lube automatic conveyor lubricators unless otherwise noted. For pricing please request a quote.

Lubricant

Temp Range

Flash Point

Viscosity

Base

Advantages

Type ML -65°F~500°F 115°F 35 SUS @ 100°F MoS2 & Synthetic Ester Good All-Around General Lubricant.
Click Here for Technical Data Sheet
Type ML-L -65°F~425°F 125°F 35 SUS @ 100°F Synthetic Esters Similar to TYPE ML, but has no solid film additives. TYPE ML-L uses an ester base, resulting in a much clearer and cleaner lubricant. It works great in applications requiring a lubricant without solid film additives.
Click Here for Technical Data Sheet
Type MX -55°F~550°F 230°F Grade 3
3.25 cSt @ 40°C/104°F
MoS2 & Synthetic Ester Higher flash point provides a slightly more stable, longer lasting conveyor lubricant.
Click Here for Technical Data Sheet
Type MX-HT 450°F~1200°F 230°F 45 SUS @ 100°F Colloidal Graphite & Synthetic Ester Similar to MX above, but has a higher operating temperature range.
Click Here for Technical Data Sheet
Type CSM-2 450°F~1250°F 240°F 45 SUS @ 100°F Colloidal Graphite & Synthetic Ester Mighty Lube Type CSM-2 is a heavy-duty, anti-wear, and thin-film Lubricant
Its solvent carrier agent acts as a cleaner, penetrator
and carrier providing a pathway to reach wear points. Type CSM-2 can stand up to pressures in excess of 100,000 PSI. This lubricant has a higher flash point, which means slower evaporation and it
allows penetration to wear points
at higher temperatures.
Click Here for Technical Data Sheet
Type SS3 up to 500 °F 143°F Grade 2
1.99 cSt @ 40°C/104°F
Synthetic MoS2 & Esters Type SS-3 is a conveyor lubricant formulated for the coating industry. High lubricity with excellent paint and powder compatibility. Water dispersion qualities make it ideal on washes, where moisture is a problem.
Click Here for Technical Data Sheet
Type LDM -55°F~550°F 230°F Grade 5
4.12 cSt @ 40°C/104°F
MoS2 & Ester Synthetic  Type LDM lubricant is specially designed to reduce and remove particles left from other lubricants or oils on the conveyor. Can run through an oven in temperatures up to 550°F
Click Here for Technical Data Sheet
Type 38 -45°F~550°F 550°F 74 cSt @ 43°C/110°F Pure Synthetic Polyol Ester Mighty Lube Type 38 is a unique synthetic lubricant designed to lubricate bearings, chains, slides, and gears in industrial applications where air temperatures often exceed 500°F. They are ashless fluids and do not contain residue forming solids. Type 38 contains proprietary ashless esters to make it suitable in applications like chains and bearings that run at high temperatures. This conveyor lubricant will not leave particles behind at high temperatures.
Click Here for Technical Data Sheet
Type CCL -65° F~575°F 130°F Grade 2
2.4 cSt @ 40°C/104°F
Synthetic Ester Type CCL is a specially-designed clean and clear thin-film, anti-wear penetrating lubricant. Uses a penetrating solvent/cleaner with a light citrus aroma. It also provides a semi-wet lubricant that will break down build up from inferior lubricants or carbons and help clean the conveyor.
Click Here for Technical Data Sheet
Type GPC -67°F~450°F 361°F Grade 22
22 cSt @ 40°C/104°F
Pure Synthetic Water Soluble Polymer with Oxirane Compatible with most automotive paints and coatings. This conveyor lubricant readily dissolves in water and water-based rinses and paints. It also inhibits rust, corrosion and oxidation and has excellent thermal stability. Type GPC does not contain silicone and will not adversely affect paint finishes. No Voc’s and is Biodegradable.
Click Here for Technical Data Sheet
Type GPC 220* -25°F~460°F 460°F Grade 220
220 cSt @ 40°C/104°F
Pure Synthetic Water Soluble Polymer with Oxirane GPC 220 does not contain silicone and will not adversely affect paint finishes. This lubricant readily dissolves in water and water-based rinses and paints. It also inhibits rust, corrosion and oxidation and has excellent thermal stability. No Voc’s and is Biodegradable.
Click Here for Technical Data Sheet
Type CNS -65°F~500°F 146°F Grade 7
6.4 cSt @ 40°C/104°F
Synthetic Ester Type CNS is a Non-Staining Lubricant. Thin film, anti-wear penetrating lubricant. Specially designed to lubricate and leave no residuals or carbons
Click Here for Technical Data Sheet
Type CNS Heavy* -65°F~500°F 146°F Grade 46
43.9 cSt @ 40°C/104°F
Synthetic Ester Type CNS is a Non-Staining Lubricant. Thin film, anti-wear penetrating lubricant. Specially designed to lubricate and leave no residuals or carbons. Water dispersion qualities make it ideal on wash lines and other locations where moisture can be a problem.
Click Here for Technical Data Sheet

*Higher Viscosity Lubricant, for use in OPCO Lubricators. Not compatible with Mighty Lube Lubricators which require a Thin Film Type lubricant.

If you need the SDS Safety Data Sheet for any of our conveyor lubricants or greases please call us at +1-231-924-6011 or send us a message.

Request Quote

View Conveyor Chain Greases